Proper Exterior House Painting Preparations Steps
The exterior painting of your house can be an expensive and costly undertaking.
There are experts who say you should paint an exterior area of the home each “this” amount of years however, others claim that a painting job will last for “that” amount of years.
The location of your house can affect the quality of your paint job is maintained, however there are other options to ensure that you receive the greatest price for the exterior paint work.
To avoid having to paint your home’s exterior frequently, it’s essential to follow the correct ways to prep the outside of your house to be painted.
Make sure that your next painting contractor is taking these measures prior to letting you contract the exterior painting project.
1. Home Pressure Washing Details
The first step in any painting project for exterior houses is to evaluate the quality of the paint and the building materials that your home is constructed from.
After the painter has got a decent idea of the condition of the siding’s surface perhaps the most significant first procedure will be the power wash. Power washing your home will get rid of any loose and chipped paint, mildew or mold as well as any wood that has been chipped or loose materials from the siding.
There are two ways to power clean the outside surface of your house both high and low pressure washing.
The use of high-pressure washers can cause destruction on your property. When the water pressure gets too high, water may enter the walls and cause water damage, slicing the mortar off of brick homes and damaging the wood siding. Water may also spray remaining paint chips that were left over from old houses in your yard and expose the paint chips for pets and children to eat. may inhale them.
Low-pressure power washing can get your home’s exterior ready to paint without the damage caused through high-pressure.
Water alone, however, won’t be enough to prep your exterior surface for a durable paint job. Three essential ingredients are required for properly power washing which will make the paint last longer. This solution needs to be applied to all surfaces not just areas with obvious mildew or mold development.
The primary agent used is sodium hypochlorite (or bleach). Other agents include trisodium phosphate and copper sulfate (without the phosphorus). A higher ratio of solution to water works faster and more effectively to kill living spores that are found in mildew, mold and moss.
The addition of soap to the mix could also help improve the outcomes. If the ratio of solution to water is excessively high it could harm your plants and home.
2. Scraping/ Sanding
Make sure the top coat is bonded to the surface. Any paint that has escaped and was not removed should be thoroughly removed and then sanded. This is an extremely important step.
3. Primer Spot Raw areas that are not primed or painted
Don’t be fooled by the claims of paints being able to bind to themselves. This is just marketing. The warning on the can says that you should not paint unfinished wood. We’ll leave this one. Let us prove it. Primers are still in demand!
4. Caulking and Sealing the Surfaces
After you have primed exterior surfaces of your house Your painting contractor must examine the exterior surface to seal any cracks that are open in your siding or the trim.
The caulking can be described as a material that is designed to create a seal of two different surfaces. It is essential to ensure that the contractor is using the best caulking.
A caulking product of the highest quality will stop cracks for a long time and assist to keep your trim and siding dry in damp or wet weather. The sealing of these areas will help to fight the rot of wood and also prevent future paint damage.
When conditions are extreme caulking can prevent the damage caused by insects and enhance the efficiency of your insulation, keeping bugs and cold weather out where they belong.
Caulking must be completed at the points between the siding and the edges of corners and around door and window frames. Caulk any ledges that the siding meets concrete or brick and also caulk your siding to seal around any pipe or spigot that runs through the siding.
5. Putting the Nail Holes.
Make sure to seal and set those nails. Any nails that protrude should be put back in place and then firmly glued on the surface using painter’s glue.
Masking & Covering
If your home’s exterior is properly cleaned and prepped now is the time to get rid of any items around that may interfere with the perfect painting job.
Surfaces not intended to be painted must be masked with painting tape or covered with drop cloths.
There are plants as well as shrubs near Your home’s trimming needs to be cut or secured to ensure that they don’t affect the painting process, or even while the painting process is drying.
3 Short Additional Notes
1.) If the downspouts and gutters were painted at the time, then downspouts must be taken away to paint the corner boards.
2.) If you can If you can, the shutters must be taken down and painted when the home is painted.
3.) The house must be re-inspected to determine if there is any missing caulk, and then re-caulked if required.
Concluding Your Exterior House Painting Project
The preparation process is essential to a long-lasting painting job on the exterior painting in Auckland. To make sure that your painting stays looking new, you should clean your home with low pressure each year to keep mildew and mold away.
